Trinic Tough Finish 2 - Matte, 1 Qt.

Availability: In Stock
Product Code: SEA44513_1-QT
  • Use Indoor or Outdoors / UV stable will not yellow
  • Increase abrasion resistance
  • Increase stain resistance
  • Can be used over most other sealers/ coatings
  • Easy application / Spray / Roll/ Mop
  • Can be spot repaired / Buffed / Re-applied / No stripping needed
  • Anti-skid version available for floors/ stairs and wet areas.
  • Eliminates the need for wax.
  • Coverage Rate: 600-1200 sqft. per gallon first coat / 800-1500 sqft. Per gallon for additional coats
  • Surface Preparation: Surface must be clean and free of debris, oils, loose sealer or coatings, soap and cleaning residues must be removed prior to application. A test area application is suggested.
  • Application: Once surface is clean TF -2 can be applied by pump spray and back roll with a short nap roller or use a paint pad or microfiber mop. For countertops a microfiber pad works well. Spread a thin layer of  TF-2 following the suggested coverage rate and allow to dry for about 4-5 hours. Fans can be used to circulate air and expedite the curing process. Avoid over application it will cause a decrease in abrasion resistance and longer cure time.
  • Cure Time: Surface should be read y for light traffic in about 4 hour s, full cure is 24 hours.
  • Post Application Care: To achieve a high gloss finish use a slow speed buffer and white Scotchbrite or lambs wool pad (buffing compounds can assist with the process but are not required) Clean surface with Non Abrasive,  non- acidic cleaner.

People who bought this product, also bought

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page