EasyFlo 60 Polyurethane Liquid Plastic

Availability: In Stock
Product Code: MOL48476_3.8-lb

Silicone Mold Making Made Simple

Polytek Easy Flo 60 Silica Liquid Plastic is a two-part, liquid polyurethane resin that is used for curing RTV (RTV stands for room temperature vulcanizing) to a white, Shore D65 plastic. This product has a simple 1A:1B mix ratio by volume and a fast demold time of 15 to 30 minutes. Polytek EasyFlo 60 is a super low-viscosity, pourable plastic, but it can be easily thickened with PolyFiber II Thickener for brush-on application. For spray application, consider EasyFlo Spray FR.

This 3.8-lb kit includes:

  • 2 lb of EasyFlo 60 Part A (~1 quart)
  • 1.8 lb of EasyFlo 60 Part B (~1 quart)
  • Fast demold times of 15 to 30 minutes.
  • Low viscosity.
  • Manageable and pourable plastic.
  • Thickens quickly with PolyFiber II as a brush-on application.
Mixed Viscosity Specific Gravity Specific Volume Maximum Exotherm Shrinkage Upon Cure
60 cP 1.03 26.9 in³/lb 230°F (1-lb mass) 0.0041 inch/inch

The color of polyurethane Part Bs may change in color from batch to batch or may darken with age, but product performance is not affected. For additional physical property specifications, refer to the Physical Properties Bulletin.

Cold Cast Bronze with EasyFlo 60

Casting: EasyFlo 60 filled with PolyFil ND

EasyFlo 60 Painting Techniques

Just added to your wishlist:
My Wishlist
You've just added this product to the cart:
Go to cart page